Upgrading your electric dirt bike’s controller is one of the most effective ways to unlock better throttle response, smoother acceleration, and improved power delivery. If you own an E Ride Pro SS or E Ride Pro SR, installing a Pro-SS controller can significantly enhance your riding experience.
In this complete installation guide for Pro-SS Controller – E Ride Pro SS – E Ride Pro SR, we’ll walk you through preparation, tools required, step-by-step instructions, safety tips, and troubleshooting advice to ensure a smooth and successful upgrade.
Overview of the E Ride Pro SS and E Ride Pro SR
The E Ride Pro SS and E Ride Pro SR are high-performance electric dirt bikes designed for off-road enthusiasts who demand torque, speed, and durability. These bikes come equipped with powerful motors and advanced battery systems.
Upgrading to a Pro-SS controller allows riders to:
- Improve throttle sensitivity
- Enhance torque output
- Optimize battery efficiency
- Customize ride modes
- Achieve smoother acceleration curves
Before beginning the installation process, it’s essential to understand how the controller works.
What Is the Pro-SS Controller?
The Pro-SS controller is the brain of your electric dirt bike. It regulates how power flows from the battery to the motor. A performance controller upgrade can modify:
- Acceleration mapping
- Power delivery curves
- Regenerative braking strength
- Motor response
- Speed limitations
Installing a Pro-SS controller can maximize your bike’s full potential while maintaining system safety.
Tools Required for Installation
Before starting the installation guide for Pro-SS Controller, gather the following tools:
- Allen wrench set
- Socket wrench set
- Screwdrivers (Phillips and flathead)
- Torque wrench
- Electrical tape
- Zip ties
- Multimeter (optional but recommended)
- Protective gloves
Having all tools ready will streamline the installation process.
Safety Precautions Before Installation
Working with high-voltage electric systems requires caution.
1. Disconnect the Battery
Always disconnect the battery before touching any wiring components.
2. Work in a Clean Environment
Ensure the workspace is dry, clean, and well-lit.
3. Avoid Metal Contact
Prevent tools from accidentally bridging electrical terminals.
4. Follow Manufacturer Instructions
Refer to your bike’s manual for model-specific details.
Safety should always be your top priority.
Step-byStep Installation Guide for Pro-SS Controller
Follow these steps carefully to ensure proper installation.
Step 1: Power Down the Bike
Turn off the ignition completely. Remove the key if applicable. Confirm that the bike is fully powered down before proceeding.
Step 2: Disconnect the Battery
Locate the battery compartment and disconnect the main battery connector. Wait a few minutes to ensure any residual charge dissipates.
Step 3: Remove the Existing Controller
The controller is typically mounted beneath the seat or within the frame housing.
- Remove the seat and necessary body panels.
- Identify the controller unit.
- Carefully disconnect all wiring connectors.
- Label wires if needed to avoid confusion later.
- Unscrew mounting bolts and remove the old controller.
Keep screws and brackets safely stored.
Step 4: Inspect Wiring Harness
Before installing the Pro-SS controller:
- Check connectors for damage
- Inspect wires for wear or fraying
- Ensure terminals are clean
- Confirm compatibility with your model
Proper inspection prevents installation issues later.
Step 5: Install the Pro-SS Controller
Now you’re ready to install the new controller.
- Position the Pro-SS controller in the mounting bracket.
- Secure it using factory bolts or provided hardware.
- Ensure proper alignment for airflow and cooling.
- Avoid overtightening bolts.
Make sure the controller is firmly secured but not stressed.
Step 6: Connect the Wiring Harness
Reconnect all wiring connectors carefully.
Typical connections include:
- Battery input
- Motor phase wires
- Hall sensor connector
- Throttle cable
- Brake sensors
- Display module
- Regenerative braking wires
Double-check each connection to ensure a secure fit.
Step 7: Secure Wiring
Use zip ties to:
- Organize loose wires
- Prevent cable movement
- Avoid contact with moving parts
- Maintain airflow
Neat wiring improves both safety and performance.
Step 8: Reconnect the Battery
Once all wiring is properly connected:
- Reconnect the battery terminals.
- Ensure connectors are fully seated.
- Confirm no exposed wiring is visible.
Step 9: Initial Power-On Test
Turn on the bike carefully.
Check for:
- Error codes on display
- Unusual noises
- Throttle response
- Warning lights
Do not ride immediately—perform stationary testing first.
Controller Setup and Calibration
Some Pro-SS controllers require configuration after installation.
Throttle Calibration
- Ensure full throttle range is recognized
- Adjust sensitivity settings if available
Ride Mode Configuration
You may be able to adjust:
- Eco mode
- Sport mode
- Race mode
- Regenerative braking levels
Follow manufacturer instructions for programming.
Test Ride Procedure
After installation and calibration:
- Start with low-speed testing.
- Check throttle smoothness.
- Test braking response.
- Gradually increase speed.
- Monitor temperature levels.
Ensure the controller operates smoothly before aggressive riding.
Common Installation Mistakes to Avoid
Avoid these errors during installation:
- Failing to disconnect battery
- Incorrect wiring connections
- Pinched cables during reassembly
- Over-tightening mounting bolts
- Ignoring firmware setup requirements
Taking your time reduces mistakes.
Troubleshooting After Installation
If you encounter issues, consider the following:
Bike Won’t Power On
- Check battery connection
- Inspect main fuse
- Confirm controller wiring
Throttle Not Responding
- Verify throttle connector
- Recalibrate throttle settings
- Check hall sensor connection
Error Codes Displayed
- Consult user manual
- Re-check wiring harness
- Ensure compatibility
If problems persist, contact a certified technician.
Benefits of Upgrading to Pro-SS Controller
Upgrading your E Ride Pro SS or E Ride Pro SR controller provides several advantages:
- Increased acceleration
- Enhanced torque output
- Smoother power delivery
- Better hill-climbing ability
- Customizable ride settings
- Improved energy efficiency
A controller upgrade can transform your riding experience.
Maintenance After Installation
To keep your Pro-SS controller functioning optimally:
- Inspect wiring periodically
- Keep controller clean and dry
- Avoid high-pressure washing near electronics
- Monitor battery health
- Check mounting bolts regularly
Preventive maintenance extends controller lifespan.
Is Professional Installation Recommended?
If you are unfamiliar with electric systems, professional installation may be a safer option. Certified technicians can:
- Ensure proper wiring
- Avoid electrical damage
- Configure settings correctly
- Provide warranty protection
However, experienced DIY riders can complete installation with careful attention.
Final Thoughts
This installation guide for Pro-SS Controller – E Ride Pro SS – E Ride Pro SR provides everything you need to perform a successful upgrade. By carefully disconnecting the battery, removing the old controller, securely installing the Pro-SS unit, and testing thoroughly, you can unlock improved performance and riding control.