water wheel transfer machine can process parts with small surface roughness, not only because of the rigidity of the machine tool and high manufacturing accuracy, but also because it has the constant linear speed cutting function. The surface roughness depends on the feed speed and cutting speed when the material, the precision and the tool are fixed.

The collision of water wheel transfer machine has great damage to the accuracy of the machine tool, and the impact of different types of machine tools is not the same. In general, the impact of the machine tool with low rigidity is greater, such as the horizontal lathe, once the machine tool collides, the impact on the accuracy of the machine tool is fatal. Therefore, for high-precision water wheel transfer machine, collision should be eliminated, as long as the operator is careful and master the anti-collision method, collision can be prevented and avoided.

water wheel transfer machine customized manufacturers talk about the main reasons for the collision of water wheel transfer machine as follows:

1, the diameter and length of the tool input error;

2, the size of the workpiece and other related geometric size input error and the initial position of the workpiece positioning error;

3, the workpiece coordinate system of the water wheel transfer machine is set wrong, or the zero point of the machine tool is reset in the process of processing, and the change is generated, and the machine tool collision mostly occurs in the process of the rapid movement of the machine tool, at this time the harm of the collision is also large, should be avoided.

Therefore, the operator should pay special attention to the water wheel transfer machine in the initial stage of the execution of the program and the machine tool in the replacement of the tool, once the program editing error, the diameter and length of the tool input error, then it is easy to collision.

In order to avoid the above collision, the operator should give full play to the functions of the five senses when operating the water wheel transfer machine, and observe whether the machine tool has abnormal action, spark, noise and abnormal ringing, vibration and burnt smell. Metal processing wechat content is good, worthy of attention. If abnormal conditions are found, the procedure should be stopped immediately, and the machine can continue to work after the problem is solved.

water wheel transfer machine https://www.zjshuangzheng.com/Integrated-Transfer-Machine.html